Fyne Audio F502SP Floorstanding Loudspeaker (pair)

With 2 x 8″ mid-bass drivers, 25 mm magnesium dome tweeter, down-firing bass port, and 92 dB sensitivity.

Improving on the F502, the UK-built SP edition uses the premium 8″ IsoFlareTM driver and 8″ bass/mid driver from the F702, featuring rigid multi-fiber cones and FyneFluteTM roll surrounds. The IsoFlare’s 25 mm magnesium compression tweeter has a unique HF wave guide pole piece delivering an incredibly even, full-range frequency response and outstanding imaging.

The F502SP also benefits from the F700’s advanced crossover components and aluminum sandwich plinth with BassTrax tractrix profile bass diffuser, re-engineered to precisely tune the F502SP’s more compact cabinet. The SP is available in high-gloss black and high gloss white as standard, or a luxurious deep gloss lacquered walnut veneer with a diamond machine cut finish on the aluminum driver chassis.

More About Special Production

The 500SP models use Fyne’s flagship BassTrax Tractrix bass porting system from the F700 and flagship F1 models.

With many crossover components and circuit architecture trickled down from the premium F700 loudspeakers, F500SP models use low-loss laminated core inductors, high-grade polypropylene capacitors, and Van Den Hul Matched Crystal silver-plated OFC wiring enhanced by Fyne’s Cryo-Lite process. The F500 SP Series also integrate Fyne’s high-quality bi-wire terminal panel with a fifth loudspeaker terminal for driver chassis grounding.

Floorstanding SP models use Fyne’s striking twin-layer metal plinth which is machined from thick aluminum plates. The integrated floor spikes are adjusted from the top of the plinth to make leveling easy, while knurled lock nuts clamp the spikes firmly in position. Machined aluminum cups are provided to protect wooden floors.

The most significant upgrade for Special Production models are the new SP Isoflare drivers. The SP Isoflare units borrow much of the technology developed for F700 models, including the F700’s 25 mm magnesium diaphragm compression tweeter and multi-fiber cone with FyneFlute roll surround.

Specifications

Type: 2.5-way, downwards firing port, with BassTrax Tractrix diffuser, twin-cavity loading system

Sensitivity: 92 dB

Nominal Impedance: 8 ohm

Frequency Response (-6 dB typical in room): 30 Hz-34 kHz

Drivers (Neodymium magnet system)
High: FyneFlute surround with 25 mm magnesium dome compression tweeter
Mid/Bass: 1 x 7.87″ (200 mm) IsoFlare point source driver, multi-fiber bass/ midrange cone, 1 x 7.87″(200 mm) multi-fiber bass/midrange cone, FyneFlute™ surround.

Crossover Frequency: 250 Hz, 1.7 kHz

Crossover Type: Bi-wired passive low loss, 2nd order low pass, 1st order high pass

Dimensions (HWD): 43.7″ x 13.3″ x 15” (1111 x 338 x 380 mm)

Weight: 67 lb.